avr/avrdude

• -p <partno> Required. Specify AVR device.

  • -b <baudrate> Override RS-232 baud rate. -B <bitclock> Specify JTAG/STK500v2 bit clock period (us). -C <config-file> Specify location of configuration file. -c <programmer> Specify programmer type. -D Disable auto erase for flash memory -i <delay> ISP Clock Delay [in microseconds] -P <port> Specify connection port. -F Override invalid signature check. -e Perform a chip erase. -O Perform RC oscillator calibration (see AVR053). -U <memtype>:r|w|v:<filename>[:format]

    • Memory operation specification. Multiple -U options are allowed, each request is performed in the order specified.
    -n Do not write anything to the device. -V Do not verify. -u Disable safemode, default when running from a script. -s Silent safemode operation, will not ask you if
    • fuses should be changed back.
    -t Enter terminal mode.

    -E <exitspec>[,<exitspec>] List programmer exit specifications. -x <extended_param> Pass <extended_param> to programmer. -y Count # erase cycles in EEPROM. -Y <number> Initialize erase cycle # in EEPROM. -v Verbose output. -v -v for more. -q Quell progress output. -q -q for less. -? Display this usage.

avrdude version 5.8, URL: <http://savannah.nongnu.org/projects/avrdude/>